Standard Vertical Blinds

Standard Vertical Blinds

Rating:
99% of 100
$0.00
In stock
SKU
Standard Vertical Blinds
Inside Mount
Outside Mount
White
Off White
Ivory
Tan
Grey
Left Stack direction
Right Stack direction
Split Stack direction
Chain and Cord
Wand
Economy Channel Panel Valance
Square Corner Dust Cover Valance
Round Corner Dust Cover Valance

Maximum number of characters: 16

Options Summary

INSIDE OR OUTSIDE MOUNT :
N/A
INSIDE MOUNT INSTRUCTIONS :
N/A
WIDTH INCHES :
N/A
HEIGHT INCHES :
N/A
A COLOR :
N/A
YOUR STACK PLACEMENT :
N/A
CONTROLS :
N/A
CONTROL PLACEMENT :
N/A
YOUR VALANCE :
N/A
ROOM LABEL :
N/A
  • Available in 5 colors

Our Standard Vertical Blinds will help put the finishing touches on your sliding glass doors without breaking the bank. With 5 simple colors and made from a sturdy PVC, there are not a lot of option, but you'll be choosing a quality nice looking vertical blind. Plus, you'll receive all the mounting hardware you'll require. At prices like these, our Standard Vertical Blinds are a 'no brainer'!

Production Time: 5-7 business days + 3-5 business days for shipping.

Shipping Rate: FREE


Vertical Blind Measuring & Ordering Instructions 
 
Selecting the Type of Mounting: 
Determine whether the blind is going to be installed inside the window frame or outside the window 
frame.   
 
 
Inside Mount (IB): 
Inside mount installations are often preferred because the blinds take up less space in the room. 
 
Measuring the Width and the Length for Inside Mount: 
For the width, measure across the top, middle, and bottom of the window opening.  Using the 
narrowest dimension, measure to the nearest 1/8”.  By using the narrowest measurement the blind will 
operate correctly.   
 
For the length, measure the up and down dimension on the left, center, and right side.  Use the shortest 
length measurement, measuring to the nearest 1/8”. 
 
The factory will make any appropriate deductions.  Do not make any width or length deductions.   
 
 
Outside Mount (OB): 
Outside mount installations are mounted on the wall or on the window molding.  It is best to overlap 
the window opening at least 3” on each side when measuring for vertical blinds. 
 
Measuring the Width and the Length for Outside Mount: 
Measure the area that the blind is to cover.  For vertical blinds it is recommended to overlap the 
window opening by at least 3” on each side for a total of 6”.  To allow for enough space for the 
mounting brackets, it is also suggested that a vertical blind be installed at least 3” above the window 
opening.   
 
Note:  When outside mount blinds are specified, no factory deductions are taken.  
 
 
Confirming Measurements: 
The most common error in ordering blinds is reversing the width and the length measurements.  
Always confirm that the width is the measurement that goes across from left to right and that the 
length is the measurement that goes from top to bottom.

Write Your Own Review
You're reviewing:Standard Vertical Blinds
Your Rating
Please type the letters below

What size are the slats? We are looking for 2.5 inches. Thanks
I am installing verticals inside 33 1/2" x 69". Can i split the blind? Also does stacking mean the way they tilt open? Can I still tilt them all at once when split? -Thank You Richie
I am going to order inside mount verticals in size 59 wide by 34 l/4 high can I get these to open in the middle or do I have to have them go all to one side?
LOOKING FOR A COMBO OF VERTICAL BLINDS. 144"X72"----48"X48"----36"X36"
What are the dimensions of the headrail for these verticals? I need the spec for depth and height please.
Paylessdecor.com /
Payless Decor 6580-C Jimmy Carter Blvd 30071 United States Norcross
1-800-925-4635 pdcustomersupport@paylessdecor.com

Standard Vertical Blinds

  • Available in 5 colors