Rod Pocket: Recommended for infrequent opening & closing where a shirred effect & partial closure are This style refers to a rod that will be inserted into a pocket at the top of the panel.
Specs: 2 1/4 : 1 Fullness. The length includes the pocket. It is usual and customary to specify the length as 1/2 in. off the floor. If you choose to add hardware with this purchase the diameter will be 1 1/4 in. metal with a ball finish in one of 3 colors.
-Sold In Pairs (Unless specified as One way draw)
-Header Always 3"
-Pocket Always 3"

Grommet Panel: Recommended for moderate opening & closing where only partial closure is possible Grommet panels provide a more modern look.
Specs: 2 1/4 : 1 Fullness, Length from Inside top edge of grommet down is included in the length. It is usual and customary to specify the length as 1/4 in. off the floor. If you choose to add hardware with this purchase the diameter will be 1 1/4 in. metal with a ball finish in one of 3 colors.
-Sold In Pairs (Unless specified as One way draw)

Pleated Panels: Recommended for Frequent opening & closing. To be hung from traversing hardware, pre -pinned for Full Closure. Pleated panels provide a more classic look.
Specs: 2 1/4 : 1 Fullness, 3 in. Classic pleat - tacked at bottom only. It is usual and customary to specify the length as 1/2 in. off the floor. The length includes the pleat. If you choose to add hardware with this purchase you will receive a traverse rod mount: pre-pinned pin knuckle 1-3/4 in. from top in basic white.
-Sold In Pairs (Unless specified by One Way Draw)
-Overlap Always 4"
-Return Size Always 4"
-Pleat Style Always 3"