2" Signature Bass Wood Blinds
|
Mount Type  This refers to the way your window treatments will attach to your window.Inside mount measurements are made inside your window. You do not have to make any adjustments for this type of measurements as it will fit perfectly recessed in your window. We’ll take care of everything.For an outside mount measurement
please measure where the window treatment would exactly cover. This way we’ll make them exactly the size you order.Outside mounts can be used to install your window treatments on walls , doors, and trim. Please refer to the measurement
instructions if you are not clear on how to approach this.
Mount Type
Tilter Location This refers to the controls that will change the angulations of your blind slats. Simply put this controls how much light is allowed in through the window treatment. This control is usually on the Left side of the window treatment when you are facing it.
Tilter Location
Tilt Control With your window treatments you have 2 options for the way you change the angulations of your slats. One is to you use the conventional cord mechanism or to use a wood wand. The cord system by pulling the cords in opposite directions you get a change in angulations and with the wand you merely turn the wand for a change. Tilt Control
Lift Location This refers to the controls that allow you to lift all the slats of the window treatments.
This feature is usually used when you are opening a window or attempting to clean.This control is usually on the Right side of the window treatment when you are facing it. Please note that blinds 12" or less in width will not have a lift control.
Lift Location
2 Blinds on 1 Headrail This format is used for larger width blinds. Any blind between the width of 96 inches and 120 inches must be ordered as two on one or three on one headrail. By building two or three blinds on one headrail, operation of the blinds are easier. Furthermore, you now create less stress on the hardware and components of the window treatments. You will still receive one valance covering all blinds to give you that finished look. When entering measurements you must enter the total width and then select two on one or three on one headrail. Please note, the blinds will have a 1/2 inch space in between them to accommodate the single headrail construction. If you have any questions, please consult one of our customer service representatives for more information
2 Blinds on 1 Headrail
3 Blinds on 1 Headrail This format is used for larger width blinds. Any blind between the width of 96 inches and 120 inches must be ordered as two on one or three on one headrail. By building two or three blinds on one headrail, operation of the blinds are easier. Furthermore, you now create less stress on the hardware and components of the window treatments. You will still receive one valance covering all blinds to give you that finished look. When entering measurements you must enter the total width and then select two on one or three on one headrail. Please note, the blinds will have a 1/2 inch space in between them to accommodate the single headrail construction. If you have any questions, please consult one of our customer service representatives for more information
3 Blinds on 1 Headrail
Battery operated tilt via Remote Control
Remote Control Operation $125
RollEase The Rollease Continuous Cord Loop system lifts blinds up to 30 lbs. Easily: heavier blinds feel lighter, moving with smoother operation. The Rollease system features one control side for both tilt and lift which can be placed on either the right or the left side of the blind. Please note that the Rollease system is available for blinds with 2-on-1 headrails, but is not available for blinds with 3-on-1 headrails or blinds with fabric tapes.
RollEase $50.00
Support Brackets Support brackets are used to help support the center of the headrail for larger blinds to prevent the blinds from bending from the weight.
Support Brackets
Hold Down Brackets Used to hold the bottom rail in place, such as on a door.
Hold Down Brackets
Extension Brackets Used with an outside mount to provide additional space between the shade and the mounting surface.
Extension Brackets
MSRP: $573.55 (You save 75%)
|
|||||||||||||||||
|
||||||||||||||||||
