2" Premium Faux Wood Blinds
|
Mount Type  This refers to the way your window treatments will attach to your window.Inside mount measurements are made inside your window. You do not have to make any adjustments for this type of measurements as it will fit perfectly recessed in your window. We’ll take care of everything.For an outside mount measurement
please measure where the window treatment would exactly cover. This way we’ll make them exactly the size you order.Outside mounts can be used to install your window treatments on walls , doors, and trim. Please refer to the measurement
instructions if you are not clear on how to approach this.
Mount Type
Tilter Location This refers to the controls that will change the angulations of your blind slats. Simply put this controls how much light is allowed in through the window treatment. This control is usually on the Left side of the window treatment when you are facing it.
Tilter Location
Tilt Control With your window treatments you have 2 options for the way you change the angulations of your slats. One is to you use the conventional cord mechanism or to use a wood wand. The cord system by pulling the cords in opposite directions you get a change in angulations and with the wand you merely turn the wand for a change.
Tilt Control
Lift Location This refers to the controls that allow you to lift all the slats of the window treatments.
This feature is usually used when you are opening a window or attempting to clean.This control is usually on the Right side of the window treatment when you are facing it
Lift Location
Support Brackets Support brackets are used to help support the center of the headrail for larger blinds to prevent the blinds from bending from the weight.
Support Brackets
Hold Down Brackets Used to hold the bottom rail in place, such as on a door.
Hold Down Brackets
MSRP: $240.48 (You save 75%)
|
|||||||||||||||||
|
||||||||||||||||||
