Cellular Shades, Roman Shades, Sheer Shades, Pleated Shades, Bamboo ShadesItems Required:
|Inside Mount||Outside Mount|
A flush mount means that the shade will be fully recessed within your window if you have the amount required by the specific product you are selecting. If you have less than the flush mount requirements or the minimum depth requirements, then your shade will protrude a bit beyond the frame of the window. If you have less than the minimum depth requirement, you will not be able to mount inside of the window. You will want to consider an outside mount.
Measure the width in several places as windows are often not even from side to side. We recommend taking at least three measurements for the width-top, middle, and bottom. Write down those three measurements and circle the smallest one. That will become the width measurement that you provide.
Measure the height in several places as windows are often not even from top to bottom. We recommend taking at least three measurements for the height- left, middle, and right. Write down those three measurements and circle the largest one. That will become the height measurement that you provide.
Do not make any deductions or additions to those exact measurements as our factory will do this for you. Typically our shades will have a deduction made on the width to ensure a proper fit. That deduction is generally between 1/4" and 1/2". However, adding a continuous cord may add to this deduction. If you are interested in the precise deduction that will be taken, please review the product specs on the product page of the shade you are considering. Note that a +/- 1/8in. tolerance is considered normal.
Give us a call, email or chat with us if you have any questions.