Our Standard Vertical Blinds will help put the finishing touches on your sliding glass doors without breaking the bank. With 5 simple colors and made from a sturdy PVC, there are not a lot of option, but you'll be choosing a quality nice looking vertical blind. Plus, you'll receive all the mounting hardware you'll require. At prices like these, our Standard Vertical Blinds are a 'no brainer'!
Production Time: 5-7 business days + 3-5 business days for shipping.
Shipping Rate: FREE
Vertical Blind Measuring & Ordering Instructions
Selecting the Type of Mounting:
Determine whether the blind is going to be installed inside the window frame or outside the window
Inside Mount (IB):
Inside mount installations are often preferred because the blinds take up less space in the room.
Measuring the Width and the Length for Inside Mount:
For the width, measure across the top, middle, and bottom of the window opening. Using the
narrowest dimension, measure to the nearest 1/8”. By using the narrowest measurement the blind will
For the length, measure the up and down dimension on the left, center, and right side. Use the shortest
length measurement, measuring to the nearest 1/8”.
The factory will make any appropriate deductions. Do not make any width or length deductions.
Outside Mount (OB):
Outside mount installations are mounted on the wall or on the window molding. It is best to overlap
the window opening at least 3” on each side when measuring for vertical blinds.
Measuring the Width and the Length for Outside Mount:
Measure the area that the blind is to cover. For vertical blinds it is recommended to overlap the
window opening by at least 3” on each side for a total of 6”. To allow for enough space for the
mounting brackets, it is also suggested that a vertical blind be installed at least 3” above the window
Note: When outside mount blinds are specified, no factory deductions are taken.
The most common error in ordering blinds is reversing the width and the length measurements.
Always confirm that the width is the measurement that goes across from left to right and that the
length is the measurement that goes from top to bottom.